Compare
Pick up to four devices and see their key specs side by side.
| Spec |  Desktop RFID Reader Request a quote for this product |  Wearable RFID Reader Request a quote for this product |  Wearable RFID Reader Request a quote for this product |
|---|---|---|---|
| Features | UHF RFIDBluetoothiPhone compatibleIP65 | UHF RFIDBluetoothiPhone compatibleIP65 | UHF RFIDLong read rangeBluetoothiPhone compatibleIP65 |
| Dimensions | 318 mm × 318 mm × 20 mm | 50 x 62 x 19mm / 1.97 x 2.44 x 0.75 in. | 108 mm × 78 mm × 18 mm |
| Weight | 1133 g / 39.96 oz. | 64 g / 2.26 oz. ( with glove: 90 g / 3.17 oz. ) | 200 g / 7.05 oz. |
| Indicator LED | PowerBT connection statusWorking (flash when scanning tags) | Red indicator will be ON when charging;Blue indicator will be ON when device has been fully charged;Green indicator will be ON when battery is higher than 20%;Green indicator will flash when battery is lower than 20%;Bluetooth is not paired when bluetooth indicator is OFF;Bluetooth is paired when bluetooth indicator is ON | Red indicator will be ON when chargingGreen indicator will be ON when device has been fully chargedBlue indicator will be ON when battery is higher than 20%Blue indicator will flash when battery is lower than 20%Bluetooth is not paired when bluetooth indicator is OFFBluetooth is paired when bluetooth indicator is ON |
| Port | USB Type-C | USB Type-C | USB Type C |
| Bluetooth | Bluetooth Low Energy (BLE) 4.0 | Bluetooth Low Energy (BLE) 5.0 | Bluetooth Low Energy (BLE) 5.0 |
| USB Type C | Data Communication via USB | USB connection to realize data transfer | USB connection to realize data transfer |
| SDK | USB, Android /WindowsBluetooth, Android / IOS | Android / iOS SDK Supported | Android / iOS SDK Supported |
| Operating Temp. | -20 °C to +50 °C | -20 °C to +50 °C | -20 °C to +50 °C |
| Storage Temp. | -40 °C to +70 °C | -40 °C to +70 °C | -40 °C to +70 °C |
| Humidity | 5%RH - 95%RH non condensing | 5% RH - 95% RH non condensing | 5% RH - 95% RH non condensing |
| Sealing | IP65 | IP65 | IP65 |
| Engine | Based on Impinj E Series chips | Based on Impinj E Series chips | Based on Impinj E Series chips |
| Frequency | 865-868 / 920-925 / 902-928 MHz ( custom-design for frequency band ) | 920-925 MHz / 902-928 MHz / 865-868 MHz | 920-925 MHz / 902-928 MHz / 865-868 MHz |
| Impinj Gen2X | Supported | Supported | Supported |
| Protocol | EPC C1 GEN2 / ISO18000-6C | EPC C1 GEN2 / ISO18000-6C | EPC C1 GEN2 / ISO18000-6C |
| Keypad | – | ON/OFF, SCAN | ON/OFF, SCAN |
| Charging Current | – | 5 V / 1.5 A | 5 V / 1.5 A |
| Charging Duration | – | 1 hours | 2 hours |
| Drop Specification | – | 1.5 m dropping on concrete | 1.5 m dropping on concrete |
| Antenna | – | Linear Polarized Antenna | Circular Polarized Antenna |
| Max Read Range | – | 80 cm | 11m (Impinj MR6 tag, size 70 x 15mm)12m (Impinj M750 tag, size 70 x 15mm)14m (Alien H3 Anti-Metal tag, size 130 x 42mm) |
| Note | – | *Range depends on tags and environment | * Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment. |
| Accessories | – | Hand wrap, wristband, lanyard, charing cradle for battery | Wrist strap, arm strap, magnetic handle |
Rows in bold are where the devices differ.