Compare
Pick up to four devices and see their key specs side by side.
| Spec |  Mobile Computer (Android 16) Request a quote for this product |  UHF RFID Module (1-Port) Request a quote for this product |  UHF RFID Module (1-Port) Request a quote for this product |
|---|---|---|---|
| Features | BarcodeNFC / HFGPS / GNSSBluetoothIP674GWi-Fi 6Android 14 or newerHot-swap battery | UHF RFIDLong read range | UHF RFIDLong read range |
| Dimensions | Standard version: 161.0 x 77.8 x 15.5mm / 6.34 x 3.06 x 0.61 in. UHF version: 165.0 x 83.8 x 138.0mm / 6.50 x 3.30 x 5.43 in. | 31.0 mm x 19.0 mm x 3.1 mm | 31.0 mm x 19.0 mm x 3.1 mm |
| Weight | Standard version: 297g / 10.48oz. (device with battery)UHF version: 707g / 24.94oz. (including handle, back clip, and battery) | 3 g / 0.11 oz. | 3 g / 0.11 oz. |
| Operating Temp. | -4° F to 122° F (-20° C to 50° C) | -13 ℉ to 149 ℉ / -25 ℃ to 65 ℃ | -13 ℉ to 149 ℉ / -25 ℃ to 65 ℃ |
| Storage Temp. | -40° F to 158° F (-40° C to 70° C) | -40 ℉ to 185 ℉ / -40 ℃ to 85 ℃ | -40 ℉ to 185 ℉ / -40 ℃ to 85 ℃ |
| Humidity | 5%RH - 95%RH non condensing | 10% - 95% | 10% - 95% |
| Impinj Gen2X | Supported | – | Supported |
| RF Chip | – | Impinj E310 | Impinj E510 |
| Air Interface Protocol | – | EPCglobal Gen2 ( ISO18000-6C )Supports Impinj Gen2X | EPCglobal Gen2 ( ISO18000-6C ) |
| Working Frequency | – | 865-868 / 920-925 / 902-928 MHz ( custom-design for frequency band ) | 865-868 / 920-925 / 902-928 MHz ( custom-design for frequency band ) |
| Output Power | – | 5-30dBm adjustable; 1dB step interval; +/- 1dB precision | 5-30dBm adjustable; 1dB step interval; +/- 1dB precision |
| Antenna Interface | – | I-PEX coaxial connector (U.FL-R-SMT-1) | I-PEX coaxial connector (U.FL-R-SMT-1) |
| Regions Supported | – | FCC 902-928 MHzETSI 865.6-867.6 MHzChina 920-925 MHzOthers for customization ( 865-868, 902-928 MHz ) | FCC 902-928 MHzETSI 865.6-867.6 MHzChina 920-925 MHzOthers for customization ( 865-868, 902-928 MHz ) |
| Connector | – | PCB stamp hole welding | PCB stamp hole welding |
| Host Communication | – | UART 3.3V TTL levelBaud Rate: 115200bps | UART 3.3V TTL levelBaud Rate: 115200bps |
| Input Voltage | – | DC 3.5-5.25 V | DC 3.5-5.25 V |
| Power Consumption in RF Output Mode | – | 4.3W@27dBm | 4.3W@27dBm |
| Power Consumption in Standby Mode（EN high TTL level） | – | 0.175 W | 0.175 W |
| Power Consumption in Power Down Mode（EN low TTL level） | – | 42.5 uW | 42.5 uW |
| Reading Rate | – | > 50 tags/sec | > 50 tags/sec |
| Reading Range | – | Up to 10m (with 4dBi antenna & M750 tag) | Up to 20m (with 4dBi antenna & M750 tag) |
Rows in bold are where the devices differ.